Heavy-duty centrifuges for Pilkington Special Glass plant
12 Mar 2007
Pilkington improves waste handling process with units to remove glass grounds from coolant
Clay Cross, UK -- Pilkington Special Glass in St. Asaph, north Wales has improved its waste handling process by installing two heavy-duty centrifuges, which remove glass grounds from coolant. The units allow the glass to be disposed of safely, with the clarified water returned to the process.
Pilkington Special Glass produce specialist glass for radiation shielding used in hospitals for shielding operators during X-rays and CAT scanning, and for protecting baggage handlers at airports during security scanning.
The special glass contains over 50% lead oxide and is manufactured as a plate, which must then be ground smooth and polished. This process produces a slurry of white water coolant and fine glass grounds. The high lead content of the glass means that the waste is classified as hazardous so requires safe disposal.
The weight of the glass made it difficult to separate efficiently and before installing the centrifuges the company used a filter bag system that was slow and required manual handling. “The centrifuge is completely automatic,” explained Brian Eccles, an engineering technologist with Pilkington. “There is no mechanical handling involved, we have been able to double the throughput of waste material and now produce a much clearer water stream for recirculation back into the process.”
The centrifuges themselves are type AS460 from Centriquip. The feed liquid flows down through a stationary feed pipe and into the spinning centrifugal bowl. The solids flow under centrifugal force to the inner wall of the bowl forming a relatively moisture-free cake. When the bowl is filled to its maximum solids holding capacity the machine stops and discharges automatically; the cycle is then repeated under plc control continuously, 24 hours a day.
By discharging when the bowl is stationary abrasion to the discharge mechanism is almost eliminated giving long intervals between services and low cost of ownership. This feature makes the AS machines ideal for use in glass cutting and polishing operations or for handling highly abrasive grindings from any process. They have the ability to work round-the-clock, providing exceptional reliability in even the harshest conditions.
Pilkington Special Glass produce specialist glass for radiation shielding used in hospitals for shielding operators during X-rays and CAT scanning, and for protecting baggage handlers at airports during security scanning.
The special glass contains over 50% lead oxide and is manufactured as a plate, which must then be ground smooth and polished. This process produces a slurry of white water coolant and fine glass grounds. The high lead content of the glass means that the waste is classified as hazardous so requires safe disposal.
The weight of the glass made it difficult to separate efficiently and before installing the centrifuges the company used a filter bag system that was slow and required manual handling. “The centrifuge is completely automatic,” explained Brian Eccles, an engineering technologist with Pilkington. “There is no mechanical handling involved, we have been able to double the throughput of waste material and now produce a much clearer water stream for recirculation back into the process.”
The centrifuges themselves are type AS460 from Centriquip. The feed liquid flows down through a stationary feed pipe and into the spinning centrifugal bowl. The solids flow under centrifugal force to the inner wall of the bowl forming a relatively moisture-free cake. When the bowl is filled to its maximum solids holding capacity the machine stops and discharges automatically; the cycle is then repeated under plc control continuously, 24 hours a day.
By discharging when the bowl is stationary abrasion to the discharge mechanism is almost eliminated giving long intervals between services and low cost of ownership. This feature makes the AS machines ideal for use in glass cutting and polishing operations or for handling highly abrasive grindings from any process. They have the ability to work round-the-clock, providing exceptional reliability in even the harshest conditions.
