Beer flow monitor
15 Oct 2013
Titan Enterprises has perfected a monitor for beer flow that combines a low-cost volume totaliser with features to detect interruption of power.
Designed primarily for beer measurement, this indicating meter is a stand-alone product that shows the amount of liquid dispensed since the last reset. The unit can only be zeroed using a hand held programmer.
These units, when mounted in the main beer delivery lines, offer an integral display of flow total and are installed using standard push-on fittings.
The Titan Beer Totaliser monitors flow rates within the range 0.5 to 10 litre/min, and is accurate to better than 1.5% of flow.
The four-digit LED display shows volume (pints / litres) delivered, from 000.0 to 999.9, measured from the initial zeroing, which can be set at the start of bar service, using the hand held programmer.
All electronics are fully encapsulated to avoid immersion damage. The Titan Beer Totaliser is constructed of food grade materials, and the turbine, mounted on sapphire bearings, has its flow rotation detected using magnets within the rotor itself and is monitored externally using non-wetted Hall Effect sensors.
For further information please visit http://www.flowmeters.co.uk/pd_totaliser.htm#pdf
